Page 96 - ISCAR FACE GROOVING LINES
P. 96
FACE GROOVE-TURN GDMA ±0.1 30 Ref.
Utility Double-Ended Insert 7°
for Machining Aluminum 6.4
CW BW
RE
Can cut arcs to 250°
METRIC
Recommended Machining Data
Dimensions Tough 1 Hard
IC07 ap f turn f groove
IC507 (mm/rev) (mm/rev)
Designation CW RE CWTOL(1) RETOL(2) BW (mm) 0.24-0.67 0.14-0.38
GDMA 840 8.00 4.00 0.05 0.050 5.60 • • 0.00-4.00
• For heavy-duty machining • DMIN for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • GAFG-R/L-8 (87)
GDMA ±.004 1.18 Ref.
Utility Double-Ended Insert 7°
for Machining Aluminum .252
CW BW
RE
Can cut arcs to 250°
INCH
Recommended Machining Data
Dimensions Tough 1 Hard
IC07 ap f turn f groove
IC507 (IPR) (IPR)
Designation CW RE CWTOL(1) RETOL(2) BW (inch) .0094-.0264
GDMA 840 .315 .157 .0020 .0020 .220 • • .000-.157 .0055-.0150
• For heavy-duty machining • DMIN for internal machining = 2.56" • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • GAFG-R/L-8 (87)
94 ISCAR
