Page 141 - THREADING CATALOG

OAL DMIN
PICCO R/L-60°-N A A
(60° Threading) WF a 60˚
Inserts with a 60° Internal Thread DCONMS

Profile and Inner Coolant Channel LU CF HC
for 2.4mm Min. Bore Diameter PDX
NUT M E T R I C THREAD TURNING
60°
Dimensions

SCREW
IC908
Designation DCONMS HC CF PDX WF a LU OAL DMIN TPN (1) TPX (2) TPIN (3) TPIX (4)
PICCO R 003.0105-8N 4.05 0.27 0.04 0.3 0.30 2.30 7.0 31.00 2.40 0.500 0.700 36.00 48.00 •
PICCO R 004.0105-10N 4.05 0.27 0.09 0.4 1.00 3.00 9.0 31.00 3.20 0.500 0.750 36.00 48.00 •
PICCO R 004.0205-15N 4.05 0.27 0.06 0.4 1.50 3.50 14.0 36.00 4.00 0.500 0.750 36.00 48.00 •
PICCO R 005.0205-15N 5.05 0.27 0.06 0.4 1.90 4.40 14.0 36.00 5.00 0.500 0.750 36.00 48.00 •
PICCO R 005.0407-15N 5.05 0.40 0.09 0.5 1.90 4.40 14.0 36.00 5.00 0.750 1.000 24.00 36.00 •
PICCO R/L 005.0510-15N 5.05 0.55 0.12 0.6 1.90 4.40 14.0 36.00 4.80 1.000 1.250 20.00 24.00 •
PICCO R 005.0510-20N 5.05 0.55 0.12 0.6 1.90 4.40 19.0 41.00 4.80 1.000 1.250 20.00 24.00 •
PICCO R 006.0510-15N 6.05 0.55 0.12 0.6 2.30 5.30 14.0 36.00 6.00 1.000 1.250 20.00 24.00 •
PICCO R 006.0510-22N 6.05 0.55 0.12 0.6 2.30 5.30 21.0 43.00 6.00 1.000 1.250 20.00 24.00 •
PICCO R 006.0612-15N 6.05 0.68 0.15 0.7 2.30 5.30 14.0 36.00 6.00 1.250 1.500 16.00 20.00 •
PICCO R 006.0815-15N 6.05 0.81 0.18 0.8 2.30 5.30 14.0 36.00 6.00 1.500 1.750 14.00 16.00 •
PICCO R/L 007.0815-15N 7.05 0.81 0.18 0.8 2.70 6.30 14.0 36.00 7.00 1.500 1.750 14.00 16.00 •
• Solid tools are suitable for PICCO-N / PICCO ACE-N type holders only
• For detailed cutting data, see pages 104-105
• DIN13 , ISO 68-1, ISO 965 (1&2) - internal tolerance: 6H
• ANSI/ASME B1.1 - internal tolerance: 2B
(1) Thread pitch minimum (mm)
(2) Thread pitch maximum (mm)
(3) Threads per inch minimum
(4) Threads per inch maximum
Holders: PICCO ACE-N • PICCO-N (Holder)

139