Page 103 - ISCAR FACE GROOVING LINES

GIMF ±0.1IC830
Utility Single-Ended Inserts 7ºIC8250
for Grooving and Turning IC808
IC90815.3 Ref. 5
IC20
IC5010CWBW
IC428RE
IC806
Dimensions METRIC IC907
Tough 1 Hard IC4
IC804

FACE GROOVE-TURN
Recommended Machining Data

Designation CW RE CWTOL(1) RETOL(2) BW ap f turn f groove
4.00 0.60 0.05 0.050 3.40 • • • • • • • • • • •
GIMF 406 5.00 0.20 0.05 0.050 4.00 • • (mm) (mm/rev) (mm/rev)
GIMF 502 5.00 0.80 0.05 0.050 4.00 • • • • • • • • • • 0.75-2.40 0.19-0.25 0.09-0.16
GIMF 508 6.00 0.50 0.05 0.050 5.00 • • 0.25-3.00 0.18-0.26 0.11-0.18
GIMF 605 6.00 0.80 0.05 0.050 5.00 • • • • • • • • • 1.00-3.00 0.23-0.35 0.11-0.21
GIMF 608 8.00 0.80 0.05 0.050 6.00 • • • 0.60-3.60 0.22-0.36 0.13-0.23
GIMF 808 1.00-3.60 0.24-0.42 0.13-0.25
1.00-4.80 0.32-0.56 0.18-0.34

• DMIN for internal applications = 70 mm • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • CGFG 51-P8 (88)

GIMF ±.004
Utility Single-Ended Inserts 7º
for Grooving and Turning
.602 Ref. .197
Dimensions
CW BW
RE

INCH Recommended Machining Data
Tough 1 Hard

Designation CW RE CWTOL(1) RETOL(2) BW IC830 ap f turn f groove
IC8250
GIMF 406 IC808 (inch) (IPR) (IPR)
GIMF 502 IC908 .030-.094 .0075-.0098 .0035-.0063
GIMF 508 IC20 .010-.118 .0071-.0102 .0043-.0071
GIMF 605 IC5010 .039-.118 .0091-.0138 .0043-.0083
GIMF 608 IC428 .024-.142 .0087-.0142 .0051-.0091
GIMF 808 IC806 .039-.142 .0094-.0165 .0051-.0098
IC907 .039-.189 .0126-.0220 .0071-.0134
IC4
IC804

.157 .024 .0020 .0020 .134 • • • • • • • • • • •
.197 .008 .0020 .0020 .157 • •
.197 .031 .0020 .0020 .157 • • • • • • • • ••
.236 .020 .0020 .0020 .197 • •
.236 .031 .0020 .0020 .197 • • • • • • • • •
.315 .031 .0020 .0020 .236 • • •

• DMIN for internal applications = 2.76" • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • CGFG 51-P8 (88)

101