Page 16 - Parting 4 Productivity inch

±.004 ±.004
DGR/L-C DGRC/LC-C
Double-Sided Inserts for RE INSL RE
Parting Bars, Hard Materials R
and Tough Applications PSIRR PSIRR
L CW CW
DGR/LC
Recommended
Dimensions Tough 1 Hard
Machining Data

(IPR)
Designation CW RE CDX fa ° INSL IC328 IC830 IC1028 IC354 IC808 IC908 IC20 f groove
DGR/L 2202C-6D .087 .008 .709 6.0 .819 • • • • • • • .0016-.0047
DGR/L 3102C-15D .122 .008 .709 15.0 .827 • • • .0031-.0055
DGR/L 3102C-6D .122 .008 .709 6.0 .827 • • • • • • • .0031-.0071
DGR/LC 3102C-6D (1) .122 .008 .709 6.0 .827 • • .0031-.0071
DGR 3102C-8D .122 .008 .709 8.0 .831 • • • .0020-.0059
DGR/L 4003C-4D .157 .012 - (2) 4.0 .744 • • • • • • .0031-.0079
DGR/LC 4003C-4D (1) .157 .012 - 4.0 .748 • • .0031-.0079
(2)
DGR 4800CS-4D .189 .001 - 4.0 .776 • .0020-.0059
(2)
DGR 4800CS-8D .189 .001 - 8.0 .776 • .0020-.0059
(2)
DGR 4803C-4D .189 .012 - 4.0 .799 • .0039-.0098
(2)
DGR 4803C-8D .189 .012 - 8.0 .799 • .0039-.0079
(2)
DGR/L 5003C-4D .197 .012 - 4.0 .752 • • • .0039-.0098
(2)
DGR/L 6303C-4D .250 .014 - 4.0 .752 • • • .0047-.0118
(2)
• Feed values for grade IC20 should be decreased by 50%
(1) Inserts with coolant holes, recommended coolant pressure 145 PSI minimum
(2) No depth limit

±.004 INSL DGR/L 1001
DGR/L-J/JS
Double-Sided Inserts for RE 7°
Parting Soft Materials, Parting R CW RE
Tubes, Small Diameters PSIRR
and Thin-Walled Parts PSIRR CDX
L CW
Recommended
Dimensions Tough 1 Hard
Machining Data

Designation CW RE CDX fa ° INSL PSIRL PSIRR IC328 IC830 IC1028 IC354 IC308 IC808 IC908 IC20 f groove
(IPR)
DGR/L 1001J-8D .039 .003 - 8.0 - 8.0 - • • • • .0008-.0024
DGR/L 1400JS-15D (1) .055 .001 - 15.0 - 15.0 - • • • • • .0012-.0027
DGR/L 1402J-8D .055 .006 - 8.0 - - 8.0 • • • • • .0012-.0031
DGR 1500J-8D .059 .002 - 8.0 - - 8.0 • • • • .0012-.0031
DGR/L 2200JS-15D (1) .087 .001 - 15.0 - - 15.0 • • • • • • .0012-.0027
DGR/L 2200JS-6D (1) .087 .001 - 6.0 - - 6.0 • • • • • • .0012-.0031
DGR/L 2202J-6D .087 .008 - 6.0 - - 6.0 • • • • • • .0012-.0039
DGR 2202J-15D .087 .008 - 15.0 - - 15.0 • • • .0012-.0031
DGR/L 3100JS-15D (1) .122 .001 - 15.0 - 15.0 - • • • • • • .0012-.0027
DGR/L 3100JS-6D (1) .122 .001 - 6.0 - - 6.0 • • • • • • .0012-.0031
DGR/L 3102J-15D .122 .008 - 15.0 - 15.0 - • • • • .0016-.0039
DGR/L 3102J-6D .122 .008 - 6.0 - 6.0 - • • • • • • • .0016-.0055
DGR/L 4003J-4D .157 .012 - (2) 4.0 - - 4.0 • • • • • • • .0016-.0059
DGR 4000JS-15D (1) .157 .000 - 15.0 - 15.0 - • .0016-.0039
(2)
DGR 4800JS-4D (1) .189 .001 - 4.0 - - 4.0 • .0016-.0047
(2)
DGR 4800JS-8D (1) .189 .001 - 8.0 - - 8.0 • .0016-.0055
(2)
DGR 4803J-4D .189 .012 - 4.0 - 4.0 - • .0016-.0071
(2)
DGR 4803J-8D .189 .012 - 8.0 - 8.0 - • .0016-.0059
(2)
DGR/L 5003J-4D .197 .012 - 4.0 - - 4.0 • • • • .0020-.0079
(2)
DGR/L 6303J-4D .250 .014 - 4.0 - 4.0 - • • • .0020-.0098
(2)
(1) Sharp corners
(2) No depth limit.

14