Page 15 - Parting 4 Productivity inch

DGN-Z ±.004
Double-Sided Inserts
for Parting Tubes, Thin- RE INSL
Walled and Small Parts
CW

Recommended
Dimensions Tough 1 Hard
Machining Data

IC1030 IC1010 IC808 IC908 f groove
Designation CW CDX CWTOL (1) RE RETOL (2) INSL (IPR)
DGN 2002Z .079 .709 .0012 .008 .0008 .823 • • • • .0012-.0047
DGN 3002Z .118 .709 .0012 .008 .0008 .823 • • .0012-.0063
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)

DGN-UT/UA ±.004
Double-Sided Inserts for Parting
and Grooving Cr-Ni Alloys, RE
Low Carbon Steel and Ductile CW
Materials at Low Feeds INSL

Recommended
Dimensions Tough 1 Hard
Machining Data

(IPR)
Designation CW CWTOL (1) RE RETOL (2) CDX INSL IC328 IC1028 IC354 IC350 IC308 IC908 IC20 f groove
DGN 2202UA .087 .0012 .008 .0008 .709 .783 • • • .0016-.0051
DGN 2202UT .087 .0012 .008 .0008 .709 .772 • • .0012-.0043
DGN 3003UA .118 .0012 .010 .0008 .709 .807 • • • • • .0016-.0059
DGN 3003UT .118 .0012 .010 .0008 .709 .807 • • .0016-.0051
DGN 4003UA .157 .0016 .012 .0008 - (3) .764 • • .0020-.0063
DGN 4003UT .157 .0016 .012 .0008 - .760 • • • • .0016-.0059
(3)
DGN 5003UT .197 .0016 .012 .0008 - .748 • • • • .0020-.0071
(3)
DGN 6008UT .236 .0016 .031 .0020 - .752 • • • • .0024-.0079
(3)
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) No depth limit

13