Page 141 - ISCAR FACE GROOVING LINES

DCONMS FACE GROOVE-TURN

C#-MAHDOR LPR
Holders with CAMFIX
Exchangeable Shanks for CDX
Parting, Grooving, Turning
and Facing Adapters WF
Right-hand shown • CDX = See specific adapter dimensions

METRIC

Designation DCONMS WF LPR CDI(1)
C6 MAHDOR
63.00 29.0 130.00 1 SR M5-04451 T-20/5 SR 14-519(a) SR M6X20-XT(b) HW 5.0 SR M6X6DIN551 14H/22H(c) EZ 125

INCH

Designation DCONMS WF LPR CDI(1)

C6 MAHDOR 2.480 1.142 5.118 1 SR M5-04451 T-20/5 SR 14-519(a) SR M6X20-XT(b) HW 5.0 SR M6X6DIN551 14H/22H(c) EZ 125

(1) 1 - Hole for data chip, 0 - Without hole for data chip
(a) For DGAD, HGAD and PCADR/L adapters; supplied in the attached plastic bag
(b) For CGPAD, HGPAD, TGPAD and HFPAD adapters; supplied with the tools
(c) Used to prevent chips from entering the upper locking screw hole
For tools, see pages: • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50)

C#-MAHD DCONMS WF LPR CP(1) Right-hand shown
Holders with CAMFIX 32.00 100 • CDX = See specific
Exchangeable Shanks for 40.00 CDX DCONMS 100 adapter dimensions
Parting, Grooving, Turning 50.00 100
and Facing Adapters 63.00 METR IC 100 CDI(2)
80.00 LPR WF 100 0
Designation 50.00 18.5 1
C3 MAHD 46.50 22.1 CP(1) 1
C4 MAHD 47.00 23.0 1450 1
C5 MAHD 50.00 29.0 1450 1
C6 MAHD 60.00 37.5 1450
C8 MAHD 1450 CDI(2)
H 1450 0
I N C WF 1
LPR .728 1
Designation DCONMS 1.968 .870 1
1.260 1.831 .906 1
C3 MAHD 1.575 1.850 1.142
C4 MAHD 1.968 1.968 1.476
C5 MAHD 2.480 2.362
C6 MAHD 3.150
C8 MAHD

(1) Coolant pressure (Bar)
(2) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50)

Spare Parts

Designation

C#-MAHD SR M5-04451 T-20/5 SR 14-519(a) SR M6X20-XT(b) HW 5.0 SR M6X6DIN551 14H/22H(c) EZ 125 EZA 125 SR 76-1022

(a) For DGAD, HGAD and PCADR/L adapters; supplied in the attached plastic bag

(b) For CGPAD, HGPAD, TGPAD and HFPAD adapters; supplied with the tools

(c) Used to prevent chips from entering the upper locking screw hole

139