Page 8 - parting_4_productivity_3375101
P. 8
W C
TAG N-C/W/M
Single-Ended Inserts for Parting, CW RE
Grooving and Slitting Bars, Hard 7º
Materials and Tough Applications
Recommended
Dimensions Tough 1 Hard
Machining Data
IC830 IC1030 IC5400 IC1010 IC808 IC908 IC30N IC807 f groove
Designation CW CWTOL (3) RE IC20 (mm/rev)
TAG N2C 2.00 0.05 0.20 • • • • • • • 0.05-0.16
TAG N2.4C 2.40 0.04 0.16 • • 0.06-0.18
TAG N3CB (1) 3.00 0.05 0.35 • • 0.12-0.30
TAG N3C 3.05 0.05 0.20 • • • • • • • • • 0.10-0.25
TAG N3M (2) 3.05 0.05 0.20 • • 0.06-0.18
TAG N3W 3.05 0.05 0.20 • • 0.10-0.25
TAG N4C 4.00 0.05 0.24 • • • • • • • • 0.10-0.30
TAG N4CB (1) 4.00 0.05 0.40 • • 0.10-0.33
TAG N4M (2) 4.00 0.05 0.24 • • 0.06-0.20
TAG N4W 4.00 0.05 0.24 • • 0.10-0.30
TAG N4.8C 4.80 0.05 0.30 • • 0.10-0.35
TAG N5C 5.05 0.05 0.25 • • • 0.10-0.35
• Feed values for grade IC20 should be decreased by 50%
(1) Larger corner radii for interrupted cut and high feed applications
(2) Similar to C-type, but with a modified edge; improved chip control at medium feeds
(3) Cutting width tolerance (+/-)
CW
TAG N-MF RE 7°
Single-Ended Inserts for Parting,
Grooving and Slitting Stainless
and Alloy Steel at Medium Feed
Recommended
Dimensions Tough 1 Hard Machining Data
IC830 IC1030 IC5400 IC1010 IC808 f groove
Designation CW CWTOL (1) RE (mm/rev)
TAG N2MF 2.00 0.05 0.20 • • • • • 0.04-0.12
TAG N3MF 3.00 0.05 0.20 • • • • • 0.06-0.18
TAG N4MF 4.00 0.05 0.25 • • • • • 0.07-0.22
TAG N5MF 5.00 0.05 0.25 • • 0.08-0.25
(1) Cutting width tolerance (+/-)
8