Page 41 - ISCAR's solutions for Heavy Machining 2022

Land Wear
Cause
• Cutting temperature is too high
Remedy
• Check cutting parameters
• Reduce cutting feed
• Increase coolant pressure/volume
• Use harder grade
• Check that the correct geometry is used

Crater Wear

Cause
• Excessive cutting temperatures and
pressures on the top of the insert
Remedy
• Reduce cutting feed
• Check that the correct geometry is used

Thermal Cracking

Cause
• Excessive variations in surface
temperature, intermittent machining,
or variations in coolant supply
Remedy
• Increase coolant pressure/volume
• Increase oil concentration percentage

Flank Wear
Cause
• High cutting speed
• Low wear resistance Carbide grade
Remedy
• Check that the correct geometry is used
• Increase coolant pressure
• Change to harder grade
• Increase oil concentration percentage
• Reduce cutting speed and increase feed

41