Page 127 - ISCAR FACE GROOVING LINES
P. 127
CWN-CWX FACE GROOVE-TURN
PCHBR/L H HF
Double-Ended Parting
and Grooving Blades for
PENTACUT Inserts
WB_2 WF OAL
Left-hand shown
Designation H CWN(2) ME TR IC OAL WB_2 Insert
110.00 8.5 PENTA 24
PCHBL 26-24R 26.0 0.50 CWX(3) HF WF(4) 110.00 8.5 PENTA 24 SR 16-212-01397L
PCHBR 26-24L 26.0 0.50 6.20 21.4 7.00 110.00 8.5 PENTA 24 SR 16-212-01397
26.0 0.50 6.20 21.4 7.00 110.00 8.5 PENTA 24 SR 16-212-01397L
PCHBR 26-24R 32.0 0.50 6.20 21.4 1.50 110.00 8.5 PENTA 24 SR 16-212-01397L
32.0 0.50 6.20 24.8 7.00 110.00 8.5 PENTA 34 SR 16-212-01397
PCHBL 32-24R 26.0 1.50 6.20 24.8 7.00 110.00 8.5 PENTA 34 SR 16-212-01397
26.0 1.50 4.00 21.4 7.15 110.00 8.5 PENTA 34 SR 16-212-01397
PCHBR 32-24L 26.0 1.50 4.00 21.4 7.15 110.00 8.5 PENTA 34
PCHBL 26-34R (1) 32.0 1.50 4.00 21.4 1.35 110.00 8.5 PENTA 34 SR 16-212-01397
PCHBR 26-34L (1) 32.0 1.50 4.00 24.8 7.15 SR 16-212-01397
PCHBR 26-34R (1) 4.00 24.8 7.15
PCHBL 32-34R
PCHBR 32-34L
• For insert/blade orientation, see the following drawings
(1) Single pocket blade
(2) Minimum cutting width
(3) Maximum cutting width
(4) To the center of inserts up to 4.15 mm width
For inserts, see pages: PENTA 34F-R/L (122)
PCHBL 26-24L PCHBL 26-24R
PCHBL 26-24R Shown
Lock
Left-hand blade
Lock
PCHBR 26-24L PCHBR 26-24R
Right-hand blade Pocket location on
the blade
125
